Panasonic KX-TCD961CXB Manual De Usuario
Chapter 6
Useful Information
59
Before Requesting Help
Problem
“
” flashes and an alarm tone sounds
when you press .
A busy tone sounds when you
press .
press .
“
” flashes during a conversation and
the call is disconnected.
Static, sound cuts in/out, fades.
Interference from other electrical units.
Interference from other electrical units.
The handset does not ring.
The base unit does not ring.
You cannot dial.
You cannot redial.
Remedy
•
You are too far from the base unit. Move closer and
try again.
try again.
•
Plug in the AC adaptor.
•
Another handset is in use.
•
The handset is out of range. Move closer to the base
unit and make the call again.
unit and make the call again.
•
Plug in the AC adaptor.
•
Locate the handset and base unit away from other
electrical appliances (p. 3).
electrical appliances (p. 3).
•
Move closer to the base unit.
•
Turn the power ON (p. 13).
•
The ringer is set to OFF. Select the desired volume
level (p. 14).
level (p. 14).
•
The ringer is set to OFF. Set to HIGH, MEDIUM or
LOW (p. 15).
LOW (p. 15).
•
Check that the dialing mode selection is correct
(p. 13).
(p. 13).
•
The unit is in call prohibition mode. Cancel the mode
(p. 31).
(p. 31).
•
The dialed number is restricted. Cancel the number
(p. 32).
(p. 32).
•
Key lock mode is set. Cancel the mode (p. 27).
•
If the last number dialed was more than 24 digits
long, the number will not be redialed.
long, the number will not be redialed.
Cordless Telephone
KX-TCD961CXB(57~68) 99.12.3 2:22 PM Page 59