Panasonic KX-TG2312 Manual De Usuario

You can select whether or not the handset keys will sound tones (key tone, 
confirmation tone, error tone). The factory preset is ON. 

If “No link to base. Move closer to base, try again.” is displayed 
even when using the handset near the base unit, the handset may have lost 
communication with the base unit. You need to re-register the handset to the base 
unit.
• Have both the handset and base unit nearby during registration. 
• Follow steps 1 and 2 listed below. You have about 1 minute to complete 

• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Try 

again from step 1.

• You can stop registration by pressing [OFF] on the handset, and pressing 

[HANDSET LOCATOR] on the base unit.

Press [MENU].

Scroll to “Initial setting” by pressing [d] 

or [B], then press Select.

Scroll to “Key tone” by pressing [d] or [B], 

then press Select.

Select “Off” or “On” by pressing [d] or [B].

Press Save, then press [OFF].

Base unit:
Press and hold [HANDSET LOCATOR] until 
the CHARGE indicator flashes.

Handset:
Press and hold [FLASH/CALL WAIT] until 
“Handset Registering” is displayed.

• When registration is complete, a beep sounds 

from the handset.

• Wait for 20 seconds after registration is 

Initial setting

Back  

K

dB

L

Key tone

Back  

K

dB

L

Key tone

:On

Back  

  Save

K

dB

L

Handset

  Registering

Handset [1]

   Registered

PQQX13981YA.book  Page 38  Friday, January 23, 2004  9:53 AM