Panasonic KX-TG2336 Manual De Usuario

For assistance, please call: 1-800-211-PANA(7262)

Preparation

Programmable Settings

Programming Guidelines

This unit has several programmable functions which can be selected from the
function menu on the display (p. 12).

How to select a function item from the menu

• To go back to the previous menu, press Back, or press Select while

“---(Go back)----” is displayed. If you press this key in the main menu, the
unit will exit programming mode.

• After programming is complete, the display will return to the main menu or the

sub-menu depending on which menu the selected item is located. (See the menu
table on page 12.)

• You can exit programming mode at any time by pressing [OFF].
• If you do not press any buttons for 60 seconds, the handset will exit programming

mode.

• If the unit detects a problem, an error message will be displayed (p. 55) and/or

error beeps will sound.

Make sure the handset and base unit are not being used. The handset
must be operated near the base unit and while off the base unit.

Press [MENU].

• The main menu is displayed (p. 12).

Scroll to the desired item by pressing [d] or
[B].

Press Select to select the desired item.

If the item has a sub-menu, select the menu item (p. 12). Repeat
steps 2 and 3 until the desired item is displayed. If the item has no
sub-menu, go to step 5.

Select the desired setting by pressing [d] or
[B], then press Save to save your setting.

• A confirmation tone will be heard and the setting

will be saved.

Press [OFF] to exit programming mode.

Handset

Back

Select

[MENU] enters the
function menu.

When “

” or “

” is

displayed, navigator key
scrolls through the menu.

[OFF] exits
programming.

The soft keys selects the
functions displayed above
each soft key.

Initial setting

Back

Select

Back

Select

Back

Save

PQQX13986YA.book 11 ページ２００４年１月２２日　木曜日　午後５時４０分