Panasonic KX-TCD400NZ Manual De Usuario
4
Setting up
Connection
Plug in the AC adaptor and the telephone line cord in order
1
,
2
,
3
.
•
Never install telephone wiring during a lightning storm.
Battery Installation
Please ensure the batteries are inserted as shown.
part should be inserted first.
Close the cover as indicated by the arrow.
•
When you replace the batteries, part should be removed first.
Do not connect the telephone line cord to the phone socket
4
until the handset is fully
charged.
The AC adaptor must remain connected at all times (It is normal for the adaptor to feel
warm during use).
warm during use).
1
4
3
2
Fasten the AC adaptor
cord to prevent it from
being disconnected.
cord to prevent it from
being disconnected.
Hook
LINE
To replace the battery:
Press the notch on the cover firmly
and slide it as indicated by the arrow.
Replace 2 batteries and close the
cover then charge the handset for
about 7 hours.
Press the notch on the cover firmly
and slide it as indicated by the arrow.
Replace 2 batteries and close the
cover then charge the handset for
about 7 hours.
400_NZ_E_02.fm Page 4 Tuesday, April 22, 2003 9:00 AM