Panasonic KX-TCD500AL Manual De Usuario

13

After your Panasonic battery is fully 
charged:

• Times indicated are for peak 

performance.

• The battery operating time may be 

shortened depending on usage 
conditions and ambient temperature.

• Clean the charge contacts of the 

handset and the base unit with a 
soft, dry cloth once a month. Clean 
more often if the unit is subject to 
grease, dust or high humidity. 
Otherwise the battery may not charge 
properly.

• The batteries cannot be overcharged 

unless they are repeatedly removed 
and replaced.

• For maximum battery life, it is 

recommended that the handset not be 
recharged until the battery icon flashes 

.

If the 

 icon flashes after a few 

telephone calls even when the handset 
batteries have been fully charged, both 
batteries must be replaced.

• Charge new batteries for 

• When replacing the batteries, be 

• Do not use non-rechargeable batteries. 

If non-rechargeable batteries are fitted 
and start charging, it may cause the 
leakage of the battery electrolyte.

• Press the notch on the cover firmly and 

slide it as indicated by the arrow.
Replace both batteries (p.12) and 
close the cover then charge the 
handset for about 7 hours.

While in use (TALK)

10 hrs approx.

While not in use 

(Standby)

120 hrs approx.

While in use (TALK)

4 hrs approx.

While not in use 

(Standby)

40 hrs approx.

500AL_e.book  Page 13  Monday, June 30, 2003  3:17 PM