Panasonic KX-TG2583ALS Manual De Usuario

The recall time depends on your telephone exchange or host PBX. 
You can select the following recall times: “700, 600, 400, 300, 250, 110,
100 or 90 msec (milliseconds)”. KX-TG2583ALB/KX-TG2583ALS comes
from the factory set to “100 msec” and KX-TG2583NZS comes set to 
“600 msec”. 
Make sure the unit is in the standby mode initially.

1

Press 

(FUNCTION/EXIT/CH)

.

2

Press 

(Å)

or 

(Ä)

repeatedly until the arrow 

points to “Program”, and press 

FWD/EDIT (É)

(Yes key).

3

Press 

(Å)

or 

(Ä)

repeatedly until the arrow

points to “Set recall time”, and
press 

FWD/EDIT (É)

(Yes key).

4

Press 

(Å)

or 

(Ä)

repeatedly until the desired time is displayed, and

press 

FWD/EDIT (É)

(Save key).

•A beep sounds. 

•To return to the standby mode, press (FUNCTION/EXIT/CH).

•You can exit the programming mode any time by pressing

(FUNCTION/EXIT/CH).

•Users in Australia can access Telstra’s “EASY CALL” service by having the recall

time set at 100 msec (this is the factory default setting), and then follow Telstra’s
“EASY CALL” instructions to operate this service.

•If you are connected via a PBX, a longer or shorter recall time may be necessary

to use PBX functions (transferring a call etc.). Consult your PBX supplier for the
correct setting.

Save DIRECT#

H

Set recall time

GF

H

=Yes

Make sure the recall time is set to 600 msec for use with Telecom’s 
Call Waiting Service. Press 

(RECALL/PLAYBACK)

or 

(RECALL)

if you hear

a call-waiting tone while talking.

•The first call is put on hold and you can answer the second call. 

•To return to the first caller, press (RECALL/PLAYBACK) or (RECALL) again. 

•Your telephone company may not support the second caller display feature. 

H

Program

GF

H

=Yes