Panasonic KX-TCD705BX Manual De Usuario

➡

41

◆

You can program a 4 digit password for the handset. The factory pre-set is 0000.
Changing the password may prevent the unauthorised use of your unit by another person.

S

/U

Y

or V

 

S

/U 

Y

or V

Enter Old PIN

Enter New PIN

Select
‘Other
Option

’

Select
‘Change
Hset PIN

’

Enter the current
4-digit  handset
PIN.

In the ‘Setting Handset’ mode

Enter the new 4-digit
PIN TWICE.
If 2nd PIN entry is
incorrect, an error
tone sounds and
display returns to
‘Enter New PIN’. If
PIN is correct, a
confirmation tone
sounds.

NOTE: Once you have programmed the password, you
cannot confirm it. We recommend you write down the
password. If you forget it, please consult your nearest
Panasonic Service Centre.

◆

The handset supplied with the base unit is already registered. If an optional
handset/base unit is purchased, the following procedure needs to be carried out before
initial use.

Z

and hold (Ï) on base unit for more than 10 seconds. A series of beeps

NOTES:
• Charge the optional handset batteries for about 10 hours before initial use.
• Register the handset number within 1 minute. If not registered within 1 minute,

ZP

on the handset to cancel the programming mode. Then re-start registration.

• Calls (both incoming and outgoing) can be conducted only via the displayed base

unit (even if the radio areas overlap with neighbouring base units).

S

/U

Y

or V

 

S

/U 

Y

or V

S

/U

Y

or V

Please Wait...

Select
‘Registration’

Select
‘Register
H/set

’

Select Base
No. to register
handset (1-4).

In the ‘Setting Handset’ mode

Handset searches
selected base.

Enter Base PIN

Y

or V

Please Wait...

•  If registration is successful, a confirmation tone

sounds and display returns to the standby mode.
The selected base number is displayed in the
standby mode.

•  If registration is not successful within 5 minutes, an

error tone sounds and display returns to original
standby mode.

KX-TCD705BX  12/7/01  2:28 pm  Page 41