Polycom IP 301 SIP Manual De Usuario

2

This section provides basic installation 
instructions and information for obtaining 
the best performance with the Sound-
Point

®

 IP 301 SIP phone.  If you require 

additional information or assistance with 
your new phone, please contact your sys-
tem administrator.

The SoundPoint

®

 IP 301 SIP User Guide 

includes regulatory compliance informa-
tion that your system administrator should 
review and can also be found at: www.
polycom.com 

Connecting Network and Power Source

AC Power Option

Power over Ethernet (PoE) Option

Cisco™Catalyst™ In-Line 
Power Switch

IEEE 802.3af compliant 
In-Line Power switch

Connect the supplied Network Cable 
between the LAN jack on the phone and 
the LAN port on the wall or hub/switch 
device port.  Connect the DC plug of the 
AC wall adapter into the supplied LAN 
cable as shown.

Using an Inline Power Cable (optional acces-
sory from Polycom), the phone can be alter-
nately powered from a Power over Ethernet 
(PoE) compliant switch or hub.  Inline Power 
Cables exist for both IEEE 802.3af and Cisco 
pre-standard PoE options.  Plug the keyed end 
of the Inline Power Cable into the LAN jack 
on the phone and the other end to an available 
port on the POE switch or hub.

Cisco™ In-Line Power 
Cable 

(Part No. 2200-11014-002 Rev A)

OR
IEEE 802.3af In-Line 
Power Cable 

(Part No. 2200-11077-002 Rev A)