Panasonic KW-WP1050E Manual De Usuario

142

Helpline Tel. No.: U.K. 0844 844 3898

Click [Network Connection] on the Top Menu.

Click [Modify] under the Wireless Information heading.

Configure the wireless connection basic settings, then click [Next>].

Configure the wireless connection security settings, then click [Save].

L

Select your wireless network mode from the pull-down menu.

L

If you have both 802.11b and 802.11g wireless devices in 
your network, select [802.11b/g]. 

L

If you have only 802.11b wireless devices, select [802.11b].

L

Select [Auto] or the desired channel from [1] to [11].

L

Enter your wireless network name (SSID) (1 – 32 
alphanumeric characters) in this data field.

L

Enable or disable the broadcasting of your SSID.

L

If you select [Disable], only wireless devices that know the 
SSID of the base unit can connect to the base unit.

L

If you select [Enable], any wireless device can detect the 
SSID of the base unit.

L

Select the desired security mode.

L

No Encryption (Open), WEP, WPA-PSK and WPA2-PSK are 
available for the wireless devices, including the handset. 
Select the desired security mode for your wireless devices 
connected to the base unit. Default is set to WEP.

For WEP 64bit:
L

Enter the network key containing 5 alphanumeric characters 
or 10 hexadecimal characters.

For WEP 128bit:
L

Enter the network key containing 13 alphanumeric 
characters or 26 hexadecimal characters.

L

Press [View] to display the network key.

L

Select [Key 1], [Key 2], [Key 3] or [Key 4] to be used if you 
use WEP. The default is set to [Key 1].

WP1050E.book  Page 142  Thursday, March 29, 2007  11:31 AM