Panasonic KW-WP1050E Manual De Usuario
Base Unit Settings
Helpline Tel. No.: U.K. 0844 844 3898
175
Note:
L
You need to register the handset to the base unit again when you change the security
mode, the network key and/or the key index.
See “Registering the handset” on page 136.
mode, the network key and/or the key index.
See “Registering the handset” on page 136.
L
When you use WEP for the network key, set either the Network Key No. 1, No. 2, No. 3
or No. 4 as a key index according to the setting of the wireless LAN card you use. When
you do not use WEP, you are suggested to use WPA-PSK/WPA2-PSK as the security
mode.
or No. 4 as a key index according to the setting of the wireless LAN card you use. When
you do not use WEP, you are suggested to use WPA-PSK/WPA2-PSK as the security
mode.
MAC Address Filtering:
This feature allows you to configure the MAC address filtering settings so that devices
without the particular MAC address will be filtered.
MAC address filtering is available only for wireless devices. Up to 5 entries can be
registered. The first entry is reserved for the handset.
This feature allows you to configure the MAC address filtering settings so that devices
without the particular MAC address will be filtered.
MAC address filtering is available only for wireless devices. Up to 5 entries can be
registered. The first entry is reserved for the handset.
To enable or disable MAC address filtering feature:
1
Click [Advanced Setup] on the Top Menu.
2
Click the [Wireless] tab, then click [MAC Address Filtering].
WP1050E.book Page 175 Thursday, March 29, 2007 11:31 AM