Panasonic KW-WP1050E Manual De Usuario

36

Helpline Tel. No.: U.K. 0844 844 3898

If you install the base unit with your existing router or modem with a built-in router, the base 
unit should be set to AP (Bridge) mode. Select [AP (Bridge)] for your connection mode in 
Initialization Setup (page 39). In AP (Bridge) mode, the base unit connects wireless 
devices to one another and to the LAN, and allows wireless devices to use a DHCP server 
on the LAN. In most cases, routers are equipped with the function as the DHCP server.

Switch the Mode selector to “HOME”.

Turn off your computer properly. Unplug any cable connecting your existing router (or 
modem with a built-in router) to your computer. However, your existing router (or 
modem with a built-in router) needs to remain connected to your cable or DSL modem.

Make sure the base unit is left unplugged. Connect the included Ethernet cable to the 
“WAN” port on the base unit and an unused Ethernet (LAN) port on your existing router 
(or modem with a built-in router).

WAN indicator

Base unit

Mode selector

AC adaptor

To AC outlet

To LAN port

To WAN port

Ethernet cable (not included)

Existing router

Cable or 
DSL modem

Ethernet cable (included)

Computer
(if necessary)

AC mains lead

WP1050E.book  Page 36  Thursday, March 29, 2007  11:31 AM