Panasonic KW-WP1050E Manual De Usuario

58

Helpline Tel. No.: U.K. 0844 844 3898

Initialization Setup is not 
displayed.

L

Dialogue boxes may not be displayed immediately due 
to the state of the LAN.

L

Check that the LAN or WIRELESS indicator lights in 
green. Also, check if the LAN card or wireless LAN card 
is on. If not, check that the LAN is connected.

L

Check that the power supply was turned on in the 
following order: modem, router (if you have one), base 
unit, computer. When turning off the power supply, do 
so in the following order: modem, base unit, router (if 
you have one), computer.

I cannot find the IP 
address assigned to the 
base unit on LAN side 
after restarting the base 
unit in [AP-DHCP] mode.

L

IP address of the base unit on LAN side changes from 
the default IP address (192.168.102.1), after you restart 
the base unit in [AP-DHCP] mode.

L

The handset shows the new IP address assigned to the 
base unit on LAN side. See “View wireless network 
status” on page 110.

The Initialization Setup 
still indicates hotel mode 
after switching the mode 
selector to home mode. 

L

To make the new mode effective, restart the base unit 
(page 192) after the mode selector position is changed.

After failure to enter the 
user name and the 
password to a prompt 
screen asking for them 
for 3 times, the base unit 
does not respond. 

L

Wait for 1 minute until the base unit becomes ready and 
access to http://192.168.102.1 (the base unit's default 
IP address) or http://kxwpa.webpage 

L

One minute interval is intentional to avoid malignant 
access to the base unit.

WP1050E.book  Page 58  Thursday, March 29, 2007  11:31 AM