Panasonic CPC-EX Manual De Usuario

Section 300-Installation

Appendix B. CPC-AII/B 8.0 Feature Update

DBS-2.3/9.2-300

DBS Manual - Revised April 2000

  Page B-9

• The “*71” code will not work if the other device is in use.

• The “*71” code will not work if FF3 (ExtPort)# 51# is set to “0”.

• If set to “Analog port RING”, the large-display phone will work like an 

SLT/OPX (no page announcements, no voice calls from other 
extensions, etc.).

• If the phone is in CF/DND (Call-Forward or Do Not Disturb), the phone 

will remain in CF/DND even if the ringing device is changed via the 
*71 code.

• The incoming ring pattern for the analog device is the same as for the 

digital key telephone (determined by the Extension Ring Pattern in FF3 
(ExtPort)# 39# (0-9)#). If this address is set to “0” (determined by CO), 
the analog device will automatically default to “1 second ON, 3 seconds 
OFF.”

Ring Patterns Not Applicable to Analog Device. The following ring 
pattern addresses will not affect the analog device:

Analog Transfer Ring Pattern FF1  2#  1#  31#  (0-6)#
SLT DISA Ring Pattern

FF1  2#  1#  34#  (0 or 1)#

Inbound Ring Pattern

FF2  (Trunk)#  17#  (0-9)#

Flash Interaction. Any disconnect signal sent to the analog port must be 
greater than the SLT Flash Control; otherwise the disconnect signal will be 
interpreted as a flash and the call will be placed on hold.

The MSG key on the VB-44225 Large-Display Phone adds the following 
functionality to the phone:

• Auto-Callback. If a callback message has been left by another 

extension, you can press the MSG key to place an automatic callback to 
the extension that sent the message. If more than one callback message 
has been received, pressing the MSG key will perform auto-callback in 
the order received.

• Auto-Answer Voice Message. You can press the MSG key to 

automatically access your voice mailbox. The phone will dial your 
voice mailbox and send access codes (if programmed) for retrieving 
new messages.