Panasonic KX-FPG378 Manual De Usuario

Descargar
Página de 110
10. Help
79
For Fax Advantage assistance, call 1-800-435-7329.
10 Help
10For Fax Advantage assistance, call 1-800-435-7329.
Error Messages
10.1 Error messages – 
Reports
If a problem occurs during fax transmission or 
reception, one of the following messages will be 
printed on the sending and journal reports (page 
48).
COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)
L
A transmission or reception error occurred. 
Try again or check with the other party.
COMMUNICATION ERROR
(Code: 43, 44)
L
A line problem occurred. Connect the 
telephone line cord to a different jack and try 
again.
L
An overseas transmission error occurred. Try 
using the overseas mode (feature #23 on 
page 70).
DOCUMENT JAMMED
L
The document is jammed. Remove the 
jammed document (page 91).
ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)
L
A transmission or reception error occurred 
because of a problem with the other party’s 
fax machine. Check with the other party.
JUNK FAX PROH. REJECT
L
The junk fax prohibitor feature of this unit 
rejected fax reception.
MEMORY FULL
L
The memory is full of received documents 
due to a lack of recording paper or a 
recording paper jam. Install paper (page 16) 
or clear the jammed paper (page 89).
NO DOCUMENT
L
The document was not fed into the unit 
properly. Re-insert the document and try 
again.
OTHER FAX NOT RESPONDING
L
The other party’s fax machine is busy or has 
run out of recording paper. Try again.
L
The other party’s fax machine rang too many 
times. Send the fax manually (page 47).
L
The other party’s machine is not a fax 
machine. Check with the other party.
L
The number you dialed is not in service.
PRESSED THE STOP KEY
L {
STOP} was pressed, and fax transmission 
or reception was canceled.
OK
L
Fax transmission or reception was 
successful.
10.2 Error messages – 
Display
If the unit detects a problem, one or more of the 
following messages will appear on the display.
10.2.1 Base unit
—————————————————————
BUSY
L
The handset you tried to copy phone book 
items to is in use.
—————————————————————
CALL SERVICE
L
There is something wrong with the unit. 
Contact our service personnel.
—————————————————————
CHECK DOCUMENT
L
The document was not fed into the unit 
properly. Re-insert the document. If 
misfeeding occurs frequently, clean the 
document feeder rollers (page 92) and try 
again.
L
Attempted to send a document longer than 
600 mm (23
5
/
8
"). Press {STOP} to remove 
the document. Divide the document into two 
or more sheets, and try again.
—————————————————————
CHECK MEMORY
L
The base unit memory (telephone numbers, 
parameters, etc.) has been erased. Re-
program.
—————————————————————
CHECK PAPER
L
The recording paper is not installed or the 
unit has run out of paper. Install paper and 
press {START} to clear the message.
L
The recording paper was not fed into the unit 
properly (page 91). Reinstall paper (page 16) 
and press {START} to clear the message.
L
The recording paper has jammed near the 
recording paper entrance. Clear the jammed 
paper (page 89) and press {START} to clear 
the message.
FPG379-PFQX2138ZA-en.book  Page 79  Wednesday, January 12, 2005  4:49 PM