Nortel Networks 1000E Manual De Usuario
Configuring a terminal and SDI ports
Page 269 of 488
Communication Server 1000E
Installation and Configuration
Figure 87
VT220 setup values
VT220 setup values
CS 1000E Core Call Server SDI connection
Each CS 1000E Core Call Server has two SDI ports on the Call Server CPU
card, COM1 and COM2. Both COM1 and COM2 are standard RS232 DTE
ports (9-pin male). COM1 is used for maintenance access, and COM2 is for
an external modem connection. Both SDI ports, COM1 and COM2, are set to:
card, COM1 and COM2. Both COM1 and COM2 are standard RS232 DTE
ports (9-pin male). COM1 is used for maintenance access, and COM2 is for
an external modem connection. Both SDI ports, COM1 and COM2, are set to:
•
Baud rate - 9600
•
Data bit - 8
•
Stop bit - 1
Global Set-Up
On Line
On Line
Comm1=RS232
Sessions on Comm1
70Hz
CRT Saver
Printer Shared
Display Set-Up
80 Columns
80 Columns
Light Text, Dark Screen
Interpret Controls
Cursor
Auto Wrap
Block Style Cursor
Jump Scroll
General Set-up
VT200 Mode, 7-bit Controls
VT200 Mode, 7-bit Controls
Application Keypad
User Defined Keys Unlocked
Normal Cursor Keys
User Features Unlocked
No New Line
Multinational
Communications Set-Up
Transmit=2400
Transmit=2400
No Local Echo
Receive=Transmit
Data Leads Only
Xoff at 64
Disconnect, 2 s Delay
8bits, No Parity
Limited Transmit
1 Stop Bit
Printer Set-Up
Speed=9600
Normal Print Mode
Speed=9600
Normal Print Mode
Print Full Page
8bits, No Parity,
Print National Only
1 Stop bit
No Terminator
Keyboard Set-up
Typewriter Keys
Typewriter Keys
Warning Bell
Caps Lock
Break
Auto Repeat
Answerback=
Keyclick High
Not Concealed
Margin Bell
Tab Set-Up Screen
Leave this screen at the default values
Leave this screen at the default values