VTech LS6215-3 Manual De Usuario

3

Each newly purchased handset (

LS6205) must be registered to the 

telephone base (

LS6215 or LS6225) before use. When first purchased, 

each expansion handset shows 

NOT REGISTERED.

When first purchased, each expansion handset shows 

NOT REGISTERED. 

You may need to charge the handset before registering to the telephone 

base. For more details on battery charging, see the table on page 2.
To register a handset:

Place the unregistered handset in the telephone base or charger. If 

PRESS FIND HS 4 SEC ON BASE does not appear on the handset 

screen after a few seconds, remove the handset and place it in the 

telephone base or charger again.
On the telephone base, press and hold  

FIND HANDSET for about four seconds (until the red IN USE light on the 

telephone base turns on) and then release the 

button. The handset shows 

PLEASE WAIT... 

and it takes up to 60 seconds to complete the 

registration. The handset shows 

X REGISTERED (X represents the handset 

number assigned) and you hear a beep when 

the registration completes.

When the registration is complete, the newly 

registered handset is assigned the next available 

handset registration number. For instance, if you 

already have 

HANDSET 1 and HANDSET 2, the next registered handset is 

HANDSET 3.

1.

2.

If the registration fails, the handset shows 

NOT REGISTERED. To reset the  

  handset, remove the handset from the telephone base or charger and place  

  it back in. Try the registration process again.

You cannot register a handset if any other system handset is in use.
Only one handset can be registered at a time.

•

•
•