VTech DS6151 Manual De Usuario

3

Once you have installed the battery, the screen indicates the battery status 

(see the table below). If necessary, place the handset in the telephone 

base to charge the battery. For best performance, keep the handset in the 

telephone base or charger when not in use. The battery is fully charged 

after 16 hours of continuous charging. See the table on page 8 for battery 

operating times.
If the screen is blank, you need to charge the handset without interruption for 

at least 10 minutes to give the handset enough charge to use the telephone 

for a short time. The handset beeps and shows 

Low battery. If you are on a 

call in low battery mode, the handset beeps every minute.
The following table summarizes the battery charge indicators and actions  

to take. 

Battery indicators

Battery status

Action

The screen is blank.

Battery has no charge 

and the handset cannot 

be used.

Charge without interruption until 

the screen shows 

(at least 10 minutes).

The screen shows 

in charger and  

 flashes.

Battery has very little 

charge and the handset 

cannot be used.

Charge without interruption until 

the screen shows 

Low battery 

(at least four minutes).

The screen shows 

Low battery and              

 flashes.

Battery has enough 

charge to be used for a 

short time.

Charge without interruption until 

the screen shows 

HANDSET  

(at least 30 minutes).

The screen shows 

HANDSET.

Battery is charged.

To keep the battery charged, 

place it in the telephone base 

when not in use.