Furuno FM-4000 Manual De Usuario

FM-4000

Page 70

[CLR/WX] Key

Immediately recalls the previously selected NOAA weather channel.
Cancel the menu selection and/or keypad entry.
Secondary use
Hold down the [16/9] key while pressing the [WX] key to change the

mode from USA to International or Canadian.

[ENT] Key

This key functions as the enter key.

SPEAKER

The internal speaker is located here.

[DISTRESS] KEY
Used to send a DSC Distress call.

13.2 INTERCOM OPERATION

13.2.1 Communication

1. Press one of the Soft key briefly to appear the key functions at the LCD

bottom, then press the [IC] key to activate the “Intercom” mode.

2. If your FM-4000 is equipped with two Remote MICs, use the [T]/[S] key to

select the station (RADIO

RADIO

, RAM

RAM

, or ALL

ALL

) you wish to

communicate with, then press the [ENT] key.

3. When the “Intercom” feature is activated, “Intercom

Intercom

”

appears on the FM-4000 and CMP30.

4. Press the PTT switch and

“TALK” is displayed.
NOTE: A warning beep is emit-
ted when the Remote MIC’s
PTT switch is pressed while
the transceiver microphone’s
PTT switch is pressed.

5. Speak slowly and clearly into

the microphone, holding the
microphone about 1/2 inch
away from your mouth.

6. When finished, release the

PTT switch.

7. Press the [CLR(WX)] key

again to revert to the “RADIO” mode.

(FM-4000 display)

(CMP30 display)

(FM-4000’s PTT switch is pressed)

(CMP30’s PTT switch is pressed)