Furuno FM-3000 Manual De Usuario

23

5.DSC Operation

The Group call function allows you to transmit a DSC signal
to a specific group only.

q Push [DSC/ENT] to enter the DSC menu.
w Rotate [CHANNEL] to select “Group,” push [DSC/ENT].

e Rotate [CHANNEL] to select the desired pre-programmed

group address or “Manual Input,” push [DSC/ENT].

• The ID code for the Group call can be set in advance. (p. 13)
• When “Manual  Input” is selected, set the 9-digit ID code

(must be set to ‘0’) for the group you wish to call by using
[CHANNEL].

- Push [CH/WX] or [SCAN] for cursor movement.
- After 9-digit is input, push [DSC/ENT] to set the ID code.

r Rotate [CHANNEL] to select a desired intership channel

or “Manual Input,” push [DSC/ENT].

• When “Manual Input” is selected, rotate [CHANNEL] to se-

lect the desired channel other than Channel 70, push [DSC/ENT].

t Push [DSC/ENT] to transmit the Group call.

• If Channel 70 is busy, the transceiver stands by until the channel

becomes clear.

y After the Group call has been transmitted, the display

changes to the previously selected channel.

u Push and hold [PTT] to communicate your message to the

responding ship or push [DSC/ENT] to exit the condition.

Group
Completed

To Call,

To Cancel
[other]

[DSC/ENT]

Sel Channel

 67

 13

˘72

Sel Address

 Smith Grp

 Manual Set

˘Osaka Grp

Sel Item
 Individual
 INDV ACK
˘Group