Vertical Communications 8012S Manual De Usuario

October, 02

Comdial

3

Background noise may prevent the sound-activated switches from 
operating properly. Avoid placing the speakerphone where it will 
detect sounds from typewriters, keyboards, printers, paging systems, 
or other equipment.

Place the telephone on a hard surface and away from table edges. Do 
not place the telephone in corners or enclosures. Do not let obstruc-
tions come between you and the microphone.

Your telephone’s pedestal is adjustable in height to allow you to select 
the most comfortable viewing angle. When you receive the telephone, 
the pedestal is in its lowest position—flush against the pedestal.

1.  Grasp the rear of the pedestal base firmly with one hand and 

lift the rear portion of the telephone upward with your other 
hand.

2.  Lift the telephone upward with one hand and raise the tele-

phone supporting arms upward with your other hand. 
(Notice there are three sets of notches under the telephone 
corresponding to the three positions available.)

3.  When the telephone is at the desired height, select the closest 

pair of notches and insert the supporting arms in the notches. 
Press down slightly on the telephone until you feel the sup-
porting arms snap into place.

Telephone

Pedestal Base

Supporting Arm

PED01

First Notch

Second Notch

Third Notch 

(For Highest Position)