Furuno FS-1562-25 Manual De Usuario
-2.2-
2.2 Intercom
The intercom provides communications between the FS-1562 and the RB-500 Remote Station
(option). They must be wire-connected. When intercom mode is in use, there is no radio
transmission.
(option). They must be wire-connected. When intercom mode is in use, there is no radio
transmission.
Calling RB-500
1. Press the [0] INTERCOM key. “COM” appears on the FS-1562 display panel.
2. Press [1]*, [ENT] keys. Calling beeps on the FS-1562 sound. The buzzer stops when the
handset of the RB-500 is picked up. * Designated number of the RB-500 if more than one is
installed.
installed.
3. Press the PTT switch to talk. Release the switch to listen.
Call from RB-500
When the FS-1562 is called from the RB-500, the FS-1562 releases a beep. Press the [ENT] key
to silence the buzzer. Press the PTT switch to talk. Release the switch to listen.
to silence the buzzer. Press the PTT switch to talk. Release the switch to listen.
Terminating the intercom
Press the [0] INTERCOM key to terminate intercom function. “COM” disappears.
2.3 Remote Station
Priority:
The Remote Station usually has higher priority than the FS-1562. This means that operation of the
FS-1562 is disabled when the handset of the RB-500 is picked up. The label “REM” appears on
the FS-1562 display when the remote control unit is in operation.
FS-1562 is disabled when the handset of the RB-500 is picked up. The label “REM” appears on
the FS-1562 display when the remote control unit is in operation.
Communication on 2182 kHz
When 2182 kHz is selected on the FS-1562, the FS-1562 takes priority.
When 2182 kHz is selected on the FS-1562, the FS-1562 takes priority.
However the Remote Station can control FS-1562 when you give priority to the Remote Station
by system setting on the FS-1562 (ROM ver. 107 and after of FS-1562).
by system setting on the FS-1562 (ROM ver. 107 and after of FS-1562).