AT&T 1070 Manual De Usuario

10

Table/desktop installation

 

Connect the two long telephone line cords to the telephone. How 
you connect the telephone line cords to the wall is determined by your 
telephone service. Determine if you have one or two-line telephone wall 
jacks and if you receive DSL (digital subscriber line) service. If one or more 
of the telephone lines has DSL service, see 

users, pages 6-8. Use only the line cords that come with the phones. If you 
need additional cords, visit our website at 

 

or call 

. In Canada, dial 

.

If you have two-line wall jacks, you can just plug the line cords into the 
wall jacks. Use Illustration A on page 11.

If you have one-line wall jacks, you need to purchase one or two two-
line adapters. Adapters are available at retail stores, by visiting our 
website at 

 or by calling  

. In Canada, call 

.

You need two adapters if you have four telephone lines and use 
the 

AUX jacks (on the back of the telephone) for equipment like fax 

machines. You will also need an additional short 2- or 4- conductor 
telephone line cord for this installation. Use Illustration B on page 11.
You need one adapter if you use both 

AUX jacks for installing your 

phones. Use Illustration C on page 12.

 NOTE: To purchase 2-line adapters (model 16598, part # 89-0071-00), 

you can visit our website at 

 or call  

. In Canada, dial 

. You can 

purchase 2-line adapters at some electronic and hardware stores.

1.

•

•

—

—