Avanti 3025 Manual De Usuario
Avanti 3025 set
9
DN buttons may be programmed in three different modes:
•
•
ringing mode - the telephone rings and the DN button
flashes green when a call is received.
flashes green when a call is received.
•
flashing mode - the DN button flashes green when a
call is received, but there is no ringing.
call is received, but there is no ringing.
•
delayed ringing mode - a call rings first at another set
or group of sets, for a programmed length of time,
before beginning to ring at your set.
or group of sets, for a programmed length of time,
before beginning to ring at your set.
Outside line buttons
One or more of the buttons on your telephone may be
associated with either specific lines or outside line groups.
To access a line for dialing outside the system, press an
outside line button.
One or more of the buttons on your telephone may be
associated with either specific lines or outside line groups.
To access a line for dialing outside the system, press an
outside line button.
Floating buttons
Calls on outside lines for which no button has been
defined, may be associated with a button just for the dura-
tion of the call. These buttons are called “floating” buttons.
Calls on outside lines for which no button has been
defined, may be associated with a button just for the dura-
tion of the call. These buttons are called “floating” buttons.
NOTE
Some of the codes in your system may be different
from those indicated here. If so, see your System
Administrator for the correct codes.
from those indicated here. If so, see your System
Administrator for the correct codes.
TO SWITCH FROM HANDSET TO HANDSFREE
During a call conducted via the handset:
1. Press [SPKR].
2. Replace the handset and talk via the telephone set
During a call conducted via the handset:
1. Press [SPKR].
2. Replace the handset and talk via the telephone set
microphone.
Avanti3025_cov.book Page 9 Tuesday, August 3, 1999 8:12 AM