Geemarc LH100 Manual De Usuario

CONTENTS

INTRODUCTION

Unpacking the loopHEAR

DESCRIPTION

INSTALLATION

Setting Up

Locating the loopHEAR

USING THE loopHEAR

Turn the loopHEAR

Off

Using

the

Headset

Using

the

External

Microphone

TROUBLESHOOTING

SAFETY

INFORMATION 13

GUARANTEE

RECYCLING

DIRECTIVES

Congratulations on purchasing your Geemarc

loopHEAR

. This is a

portable induction loop system that can be used in a variety of locations,
both public and private.

This tough but light unit is easily transported and an integral battery
enables it to be freestanding. This battery is both replaceable and
rechargeable and long usage can be expected (up to 24 hours). The loop
is contained within the unit hence there are no trailing wires. The
loopHEAR

will cover an area of approximately 1m

/3.3ft

. There is an

integral microphone that picks up speech and conversations. An external
microphone may be added if required (supplied). This induction loop
system is designed to assist hearing aid users by transmitting direct to
their telecoil equipped hearing aid (which must be switched to the ‘T’
position).

The outer carton has been specially designed as a handy carrying case. It
is recommended to retain this carrying case to enable safe transportation
when transporting the loopHEAR

Its is important that you read the instructions below in order to use your
Geemarc

loopHEAR

to its full potential. Keep this user guide in a safe

place for future reference.

CONTENTS

INTRODUCTION

Note: users of digital hearing aids must make sure their aids have
been programmed for use with the ‘T’ setting.