Toshiba 57HM117 Manual De Usuario

Descargar
Página de 74
64
HM117 (E/F) Web 213:276
Chapter 9: Appendix
How to replace the lamp unit
Required tools:
Manual screwdrivers (Phillips and slotted)
Soft, lint-free gloves
1
Turn off the TV and unplug the power cord.
2
STOP! Allow the lamp to cool for at least one (1) hour 
before replacing it.
3
On the lamp unit door on the back of the TV, loosen the 
screw using a manual screwdriver, and then remove the 
lamp unit door.
4
Using a manual Phillips screwdriver, loosen the two 
screws on the lamp unit.
5
Grasp the lamp unit handle and gently pull the lamp unit 
straight out of the TV. Set the old lamp unit aside 
(- “Disposing of the used lamp unit” on page 65).
6
Carefully insert the new lamp unit straight into the TV 
until it is fully seated.
WARNING: RISK OF ELECTRIC 
SHOCK!
TO REDUCE THE RISK OF ELECTRIC 
SHOCK, NEVER REMOVE TV COVERS, EXCEPT AS 
SPECIFIED HEREIN.
 REFER ALL SERVICING NOT 
SPECIFIED IN THIS MANUAL TO QUALIFIED SERVICE 
PERSONNEL. Failure to follow this WARNING may result in 
death or serious injury.
WARNING: Eye damage may result from 
directly viewing the light produced by 
this lamp.
Always turn off the TV and unplug the power cord before 
opening the lamp unit door.
Loosen screw
using manual
screwdriver
TV back
Lamp unit door detail
WARNING: RISK OF ELECTRIC 
SHOCK!  
The lamp unit door is provided with an 
interlock to reduce the risk of electric shock and excessive 
ultraviolet radiation. Never defeat its purpose or attempt 
to service without removing the lamp unit door 
completely.
 Failure to follow this WARNING may result in 
death or serious injury.
NOTE: 
Wear soft, lint-free gloves when 
replacing the lamp unit.
Lamp unit screws
57HM117_EN.book  Page 64  Friday, March 23, 2007  9:48 AM