Toshiba 72MX196 Manual De Usuario

Descargar
Página de 96
61
MX196 (E/F) Web 213:276
Chapter 7: Using the THINC
 home network feature
4
Highlight Basic Network Setup and press T.
5
The message “Obtain network address automatically?” 
will display. Highlight Yes and press T.
6
The message “Please wait…” will display while the TV is 
attempting to load the network address information from 
the DHCP server.
If the automatic network address setup is successful, 
go to step 7.
If the automatic network address setup
 is not 
successful, go to step 8.
7
If the automatic network address setup is successful, the 
following screen will appear:
a) Press T to close the screen and return to the Network 
menu.
b) Skip to section C, “Setting up file sharing on your PC” 
(- page 62). 
8
If the automatic network address setup is not successful, 
the following screen will appear:
a) Make sure all cables for your home network are 
securely connected.
b) Make sure your home network is set up properly. See 
the Installation Guide for TV connection 
information. Also consult the owner’s manuals for 
your other components.
c) Make sure the DHCP and security settings on your 
home router are correct. Consult the owner’s manual 
for your router.
d) Retry the automatic network address setup by following 
these steps:
(1) Highlight OK and press T.
(2) Repeat steps 1–6. (If you have already repeated 
this setup process, go to step 9.)
9
If, after repeating steps 1–6, you receive the error 
message shown in step 8: 
Either…
a) Highlight “OK” and press T.
b) Go to “Manually setting up the network address.”
Or…
a) Highlight “OK” and press T. 
b) Continue to sections C, D, and E (- pages 62–69) 
(to set up and use file sharing) and/or to sections F and 
G
 (- pages 70–78) (to set up and use e-mail 
scheduling).
If the file sharing and/or e-mail scheduling features 
work correctly,
 then the automatic network address 
setup was successful (even though the TV displayed the 
error message).
Manually setting up the network address
This setup requires the data listed below. You can get this 
data from either your ISP or the configuration utility for 
your DSL/cable modem or router.
1
Press Y and open the Setup menu.
2
Highlight Installation and press T. The Installation 
menu appears. 
3
Open the Network menu.
4
Highlight Basic Network Setup and press T. 
5
The message “Obtain network address automatically?” 
appears. 
Highlight No and press T.
CH RTN
ENTER
EXIT
Navigate
Select
Back
Exit
Basic Network Setup
E-mail Scheduling Setup
Home File Server Setup
Software Upgrade
Network
Basic Network Setup
Obtain network address automatically?
Yes
No
Basic Network Setup
Please wait...
Basic Network Setup
Done! Network address information has been found!
Exit
IP address:
___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___
Subnet mask:
___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___
Gateway (Router) address:
___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___
DNS (Domain Name Server) address:
___ ___ ___ . ___ ___ ___ . ___ ___ ___ . ___ ___ ___
Basic Network Setup
Obtain network address automatically?
Yes
No
(continued)
MX196_EN.book  Page 61  Tuesday, June 27, 2006  1:43 PM
manuals search engine