Vidikron Vision 65 Manual De Usuario
20
Vidikron Vision Model 65/Model 75 Installation/Operation Manual
Installing the AutoScope Lens
Motor
Figure 3-5 shows the Vision 65/CineWide with AutoScope or Vision 75/CineWide with
AutoScope motor assembly.
AutoScope motor assembly.
Figure 3-5. Vision 65/CineWide with AutoScope or Vision 75/CineWide with AutoScope
Motor Assembly – Exploded View
Motor Assembly – Exploded View
Remove Projector Front Height Adjusters:
Place the projector upside down on a blanket
or other soft surface. Then, remove the two
height adjusters at the front of the projector
by turning them counterclockwise until they
come out.
or other soft surface. Then, remove the two
height adjusters at the front of the projector
by turning them counterclockwise until they
come out.
➤
4
5
Screw, Phillips
Pan-Head,
10-32 x 1/2”
(4x)
1
AutoScope Lens Motor 2
Screw, Phillips Flat-Head,
10-32 x 1/4” (2x)
3
CineWide with AutoScope
Ceiling Mount Adapter/
Projector Stand, Right
CineWide with
AutoScope
Ceiling Mount Adapter/
Projector Stand, Left
7
Nylon Spacer,
5/8” diameter x
3/16” high (4x)
6 Screw, Phillips
Flat-Head,
Undercut,
M6 x 12mm
(4x)
Undercut,
M6 x 12mm
(4x)