Vivitek dw6831 Manual De Usuario

DU6871/DW6851/DX6831 DLP Projector - User's Manual

Change the name of the memory: The default name is Memory_number� You can

use the Back space button to delete the characters in the dialog box� The Caps

button is used to selected uppercase and lowercase characters. Use ▲▼◄► to

select the character and press the Enter button to confirm the input character� The

maximum allowable 9 characters including texts, numbers, symbols and spaces�

Cancel: Press the Cancel button to cancel the memory setting�

Accept: Press the Accept button to confirm the memory setting�

Clear Memory: Select the Clear Memory button and press the Enter button to

confirm cancellation of the selected setting� A prompt of the confirmation is shown

on the button� To confirm the cancellation of the selected setting, press the Enter

button. Otherwise, Use ▲▼◄► to move the cursor away and do not cancel the

selected setting�

Note:

• The Lens Memory function must be used in conjunction with VivitekD88-ST001, D88-UWZ01, D88-

WF18501, D88-WZ01, D88-SMLZ01, D88-LOZ101 or D88-LOZ201 serial lens.

• To ensure that the projector can remember the lens parameters precisely, make sure to perform the Center

Lens function whenever a lens is mounted.

•

Center Lens

This is the lens calibration function� The projector adjusts the lens parameters for the

lens memory function to work and sets the lens to the default center position�

•

Keystone

Select the Keystone function and use ◄► to adjust the screen for the vertical distortion

brought about by the projection angle�