Vidikron Model 85 Manual De Usuario

1.

 

Using a 9/64” hex wrench, turn this to move the lens up or down. 

2.

 

Lights red to indicate that the projector is in standby; flashes blue during warm-up or 
cool-down or lights blue to indicate normal operation. 

3.

 

Lights blue to indicate normal lamp operation; lights red if the lamp has failed. 

4.

 

Lights red to indicate that the projector has overheated and shut down. 

5.

 

Hot air exits the projector through these vents. This air can be quite hot. Ensure that 
there are no heat-sensitive objects near it and that it is never blocked. 

6.

 

Pass cables through this opening.

7.

 

Cool air enters the projector through these vents. To prevent overheating, ensure that 
these vents are never blocked. 

8.

 

Turn this tab to make the projected image larger or smaller. 

9.

 

You can rotate the logo to match the projector orientation: inverted (ceiling-mounted) 
or upright. To rotate the logo, grip it at the sides, pull it away from the projector and 
rotate it 180 degrees.

10. FOCUS RING

 

Turn this ring to focus the image. 

11. LAMP COVER

 

Remove this cover to access the lamp compartment.

12. REAR PANEL ACCESS DOOR

 

To access the connector panel, 
press the door release button so it 
pops out. Turn the knob clockwise 
or counter-clockwise and pull 
gently on it to open the door.