Vidikron Vision 50 Manual De Usuario

Descargar
Página de 90
8
Vidikron Vision 50 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
1.
HDMI (Digital)
 
HDCP-compliant digital video input for connecting a DVD player or HD tuner with a DVI 
or HDMI output.
2.
COMP 1 (RCA connectors)
 
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for 
component video from sources such as DVD players.
3.
COMPOSITE VIDEO INPUT
 
Standard composite video input for connecting a VCR, laser disc player or other 
composite video source.
4.
S-VIDEO 
 
A standard S-Video input for connecting a DVD player, satellite receiver or Super VHS 
(S-VHS) VCR. 
5.
RS-232 CONTROL PORT
 
A female, RJ-11 connector for interfacing with a PC or home theater automation/control 
system. 
6.
12-VOLT (250 mA) TRIGGER OUTPUT (3.5-mm, mini phono jack) 
 
Connection for a 12-volt trigger-controlled device. This can be a retractable screen, 
screen mask or the Vidikron CineWide with AutoScope system. 
7.
COMP 2 / RGB
 
Five, BNC connectors for connecting either RGB or component (YPbPr) high-definition 
television signals. (The Vision 50 automatically detects the signal format.) 
2.3 
Built-In Keypad
To control the projector when signals 
from a remote control cannot reach it, 
use the built-in keypad next to the 
connector panel.
Because the built-in keypad has fewer 
keys than the remote keypad, certain 
projector functions are accessible only 
through the menu system rather than via 
a direct key.
For best results, do not run your DVD player in progressive mode.
Tip
ZOOM+
ZOOM+
ZOOM-
ZOOM-
POWER
POWER
MEMORY
MEMORY
LENS
SHIFT
LENS
SHIFT
SOURCE
/ENTER
SOURCE
/ENTER
MENU
/EXIT
MENU
/EXIT