Vidikron Vision 50 Manual De Usuario
20
Vidikron Vision 50 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
Installing the AutoScope Lens
Motor (Vision 50/CineWide
with AutoScope)
Figure 3-5 shows the Vision 50/CineWide with AutoScope motor assembly.
Figure 3-5. Vision 50/CineWide with AutoScope Motor Assembly – Exploded View
Remove Projector Front Height Adjusters:
Place the projector upside down on a blanket
or other soft surface. Then, remove the two
height adjusters at the front of the projector
by turning them counterclockwise until they
come out.
or other soft surface. Then, remove the two
height adjusters at the front of the projector
by turning them counterclockwise until they
come out.
➤
3
4
Screw, Phillips
Pan-Head,
10-32 x 1/2”
(10x)
1
AutoScope
Lens Motor
2
CineWide with
AutoScope
Ceiling Mount
Adapter/
Projector Stand,
Right
AutoScope
Ceiling Mount
Adapter/
Projector Stand,
Right
CineWide with
AutoScope
Ceiling Mount
Adapter/
Projector Stand,
Left
AutoScope
Ceiling Mount
Adapter/
Projector Stand,
Left
5 Nylon Spacer,
5/8” diameter x
3/16” high (10x)
3/16” high (10x)