Sony 2-691-651-13(2) Manual De Usuario

 GB

Your TV uses a projection lamp as its light source. As with 
any lamp, it has lifespan and needs to be replaced when the 
lamp indicator flashes or the screen becomes darker.

• After switching on your TV, it may take a while (1 minute 

or less) before the picture appears.

• When the projection lamp wears out, the screen goes dark.

Replace the lamp with a new Sony XL-5100 replacement 
lamp (for KS-60R200A/50R200A, not supplied) or XL-
5300 replacemant lamp (for KS-70R200A, supplied). 
How to replace the lamp, see page 39.

The light emitted from the lamp is quite bright when your TV 
is in use. To avoid eye discomfort or injury, do not look into 
the light housing when the power is on.

(KS-70R200A only)
The speakers on the KS-70R200A can be detached if 
required. If you use a multi-channel surround speaker 
system and there is insufficient space to install the 
display unit, we recommend using the speakers 
detached.

Remove the three screws that are located 
on the rear of the speaker, and pull the 
speaker straight out to detach it from the 
panel.

When removing the screws, use a coin to turn 
them counterclockwise.

Attach the side cover that came in the box.

Press the cover at the top, middle, and bottom to 
make sure that it is attached securely (see 
illustration).

Facing the TV, make sure that the side covers marked 
“R” (right) and “L”(left) are attached to the 
corresponding sides of the TV.

Tighten the side cover with the three 
screws that you removed in step 1.

When attaching the screws, use a coin to turn them 
clockwise.

Repeat steps 1 through 3 with the speaker 
on the other side.

After you remove the speakers, place them in the box that 
originally contained the side cover.