Samsung HLT4675S Guía Del Usuario

4  Press the ▲ or ▼ button to select Analog or Digital, then press the ENTER button. 

You can select the correct signal source among 

STD, HRC and IRC by pressing the 

▲ or ▼ button, then press the 

ENTER button. 

To memorize the channels, press the ▲ or ▼ button to select 

Start, then press the 

ENTER button.

➢

  If you have Digital cable TV, select the signal source for both Analog and Digital.

➢

  STD, HRC, and IRC identify various types of cable TV systems. Contact your local 

cable company to identify the type of cable system that exists in your particular area. 

At this point the signal source has been selected.

5  The TV begins memorizing all available stations. 

When pressing the 

ENTER button during a storing process, the Stop Auto Program? 

message will be displayed. Select 

Yes by pressing the ◄ or ► button. 

Press the 

EXIT button to exit.

➢

  The TV must be connected to an antenna/cable in order to receive digital TV signals. 

Even if a particular channel is deleted from the memory, you can always tune to that 

channel directly by using the number buttons on the remote control.

➢

  •  All available DTV and analog channels are automatically stored in memory.

 

•  It takes approximately 3 to 10 minutes to memorize channels.

Auto Program in Progress.

15%

Air 16

Enter

Stop Auto Program?

15%

Enter

Move

Selects a cable signal type for your location.

Analog

Start

STD 

HRC

IRC

Digital

STD 

HRC

IRC

Enter

Return

Move

Return

Return