Linksys Stereo Speaker Kit / Wired Accessory DMSPK50-EU Prospecto

Los códigos de productos
DMSPK50-EU
Descargar
Página de 2
Cisco Consumer Business Group 
121 Theory 
Irvine, CA 92617 USA
www.linksysbycisco.com
Linksys, Cisco and the Cisco Logo are registered 
trademarks or trademarks of Cisco Systems, Inc. 
and/or its affiliates in the U.S. and certain other 
countries. Other brands and product names are 
trademarks or registered trademarks of their 
respective holders. Copyright © 2008 Cisco 
Systems, Inc. All rights reserved.
The  maximum  performance  for  wireless  is  derived  from  IEEE  Standard  802.11  specifications.  Actual  performance  can  vary,  including  lower  wireless 
network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from 
the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and 
other adverse conditions.
Specifications are subject to change without notice. 
8112010NC-RR
Model:
 DMSPK50
Specifications
Model 
DMSPK50
Main Functions 
Two Way Bass-Reflex Loudspeaker
Frequency Range 
-6dB at 65Hz and 23kHz
Frequency Response 
80Hz-20kHz +/-3dB
Crossover Frequency  
3kHz. 2’nd Order LPF. 2’nd Order HPF
Sensitivity  
85dB SPL (2.83V in 1meter/3’)
Nominal Impedance  
6 Ohm
Minimum Impedance  
4.6 Ohm
Max Power Handling  
50 Watt
Recommended  
Amplifier Output Power  
20W to 50W
Terminals 
Gold Plated for up to 10 AWG / 4mm2 Speaker Cable
Front grille  
Perforated Aluminum Front
Finish  
Black Enclosure. Natural Anodized Front Grill
Placement  
On Stand or Shelf (Minimum 5 cm / 2" from Back Wall)
Environmental
Dimensions 
5.1" x 5.9" x 6.2" 
 
130 x 149 x 157 mm 
Weight 
3.3 lb (1.5 kg)
Certification 
CE
Operating Temp. 
32 to 104° F (0 to 40° C)
Storage Temp. 
-4 to 158° F (-20 to 70° C)
Operating Humidity 
10 to 85% Noncondensing
Storage Humidity 
5 to 90% Noncondensing
Package Contents
Two Loudspeakers (One Pair) DMSPK50
Two 9’ (3 m) Speaker Cables (AWG16)
Quick Install (Printed)
Supplemental Information (Printed)
Minimum Requirements
A Stereo System with an Amplifier of 20-50W Output Power pr. Channel into 4 Ohm load
A Stand or Shelf with Distance to Rear Wall of Minimum 2" (5 cm)
Extended Speaker Cables if Distance Requires Cables Longer Than 9’ (3m)
Features
Two-Way High Performance 
Audio Loudspeakers with 3/4" 
Neodymium Silk Tweeter and 
4" Long-Throw and High-Gauss 
Woofer
Vented Tuned Port Type with 
Bass Extension Down to 65Hz
Goldplated Terminals, Accepting 
High Performance Speaker 
Cables up to 10 AWG / 4mm2
Acoustically Optimized 
Aluminum Front Grille. Always 
Stable Three Feet Foundation
Tuned and Optimized for 
Excellent Music Reproduction 
with High Performance 
Amplifiers and Hi-Fi Equipment
Special Matching Design and 
Size with Linksys by Cisco 
Director (DMC250)