EIKI EIP-3500 Manual De Usuario

Check

• Projector power cord is not plugged into the wall outlet.
• Power to the external connected devices is off.
• The selected input mode is wrong.
• The AV MUTE function is working.
• Cables incorrectly connected to rear panel of the projector.
• Remote control batteries have run out.
• External output has not been set when connecting notebook computer.
• The lamp unit cover is not installed correctly.
• Cables incorrectly connected to the rear panel of the projector.
• “Bright” is set to minimum position.

• Image adjustments are incorrectly set.
(Video Input only)
• Video input system is incorrectly set.
(INPUT 1, INPUT 2 only)
• Input signal type (RGB/Component) is incorrectly set.

• Adjust the focus.
• The projection distance exceeds the focus range.
(Computer Input only)
• Perform “Fine Sync” Adjustments. (“Clock” Adjustment)
• Perform “Fine Sync” Adjustments. (“Phase” Adjustment)
• Noise may appear depending on the computer.

• Cables incorrectly connected to rear panel of the projector.
• Volume is set to minimum.

• If the picture is normal, the sound is due to cabinet shrinkage

caused by room temperature changes. This will not affect
operation or performance.

• See “Maintenance Indicators”.

Problem

An unusual sound is

occasionally heard

from the cabinet.

Maintenance

indicator illuminates or

blinks in red.

Page

29

—

33

34

23,25-28

15

69

67,68

23,25-28

44

44

51

47

32

19

48
48

—

23,25-28

33

—

64

Sound is heard but no

picture appears.

Color is faded or poor.

Picture is blurred;

noise appears.

Picture appears but no

sound is heard.

No picture and no sound

or projector does not start.