Epson LS47P1 Manual De Usuario

Setting Up and Controlling 
Channels

Before you use your TV to view television programs, you may need to set up your available 
channels. You may also want to use the TV’s channel control features or block unwanted 
viewing of channels or input sources by children, as described in these sections:

•

“Setting Up Your TV Channels” below

•

•

•

•

If you’re receiving your TV programs using a broadcast antenna or a cable system without a 
cable box, you need to set up the channels that the TV can receive. 

You can use Auto Program to automatically search for the available channels and set them up. 
Then, for channels that are not automatically detected, you can use Manual Program to add 
them. You can also choose to have the TV “skip” certain channels that you don’t want to view.

Before setting up your channels, make sure you’ve connected your broadcast antenna or cable 
service line to the ANT 1 or ANT 2 connector on the back of the TV. Then press the
TV/Video button on the TV panel or remote control to select your TV signal.

Press the Menu button on the TV panel or the remote control. 

To move to the Channel tab, press Next >.

When the Channel tab is highlighted, press Enter. The Antenna 1 setting is highlighted.

If you receive your TV 
programs using a cable, 
satellite, or digital TV 
service with a separate 
receiver box, you don’t 
need to set up your 
channels. The receiver box 
does that for you.

You can use the buttons on 
the TV or the remote for all 
menu operations.