HP (Hewlett-Packard) 0706124 REV B Manual De Usuario
Selecting a Print Mode
3-9
6.
Press the
C and
p keys to select the color map you will use.
The color map diagram changes with your selection.
7.
Press
D to continue.
The control panel displays the Select Passes menu.
8.
Press the
C and p keys to select the number of print passes
you want to use.
A higher number of passes produces the best print quality,
but a lower number of passes will increase print speed. The
default is 8 passes.
but a lower number of passes will increase print speed. The
default is 8 passes.
9.
Press
D to continue.
The Front Page screen appears. The print mode is now
selected. If you changed the number of passes by more than
one pass, you should run a Media Feed Calibration (see
“Media Feed Calibration” on page 4-4) and Head-to-Head
registration (“Auto Calibrations” on page 4-19) before print-
ing.
selected. If you changed the number of passes by more than
one pass, you should run a Media Feed Calibration (see
“Media Feed Calibration” on page 4-4) and Head-to-Head
registration (“Auto Calibrations” on page 4-19) before print-
ing.
10. Install the Color Map card that corresponds to the mode you
selected into the plastic sleeve on the printer’s top cover.
Refer to the Color Map card to help you load inks into the
correct locations. See the figure on page 3-5 for an illustra-
tion of a Color Map card.
correct locations. See the figure on page 3-5 for an illustra-
tion of a Color Map card.