Datalogic Scanning 4400 SERIES Prospecto

©2007 Datalogic Mobile, Inc.

R44-2828 (Rev B)

09/07  

The Falcon 4400 Series Serial Printer Adapter attaches to the 
bottom of a Falcon 44XX unit and allows you to connect and 
print directly to a printer.

To attach the printer adapter to a Falcon, you must 
remove the strap studs, as well as the optional strap 
stud bumpers, if present. 

1.

Loosen and pull off the strap stud bumpers (if 
present). If necessary, pry off using a screwdriver.

2.

Use a 5/64” Allen wrench (included with the 
printer adapter kit) to loosen and remove each 
Strap Stud.

Once you have removed the strap studs, attach the 
adapter to the Falcon by sliding into place and 
tightening the thumbscrews on the adapter.

Strap Studs

Strap Stud  
Bumpers

Attaching the Serial Printer Adapter