Honeywell 301C Manual De Usuario
Honeywell 301C User Manual
Initial Startup
Make sure that all wiring has been completed according to
specifications in the wiring details before powering up the unit. When
all is secure, remove the SHDN jumper to power-up the unit. Within
sixty seconds the controller will be fully operational.
specifications in the wiring details before powering up the unit. When
all is secure, remove the SHDN jumper to power-up the unit. Within
sixty seconds the controller will be fully operational.
Datalogger (SD card)
The DLC (Data Logger Card) option for the controller collects data and
stores it on a digital Flash memory card (SDCard). In the event that
the card memory becomes full:
• Information logging is stopped
• No SDcard flag is displayed on-screen
• The SDcard LED blinks
See the Acquisition section for more details on starting and stopping
the datalogging function. SDHC cards are not supported; use only SD
cards.
stores it on a digital Flash memory card (SDCard). In the event that
the card memory becomes full:
• Information logging is stopped
• No SDcard flag is displayed on-screen
• The SDcard LED blinks
See the Acquisition section for more details on starting and stopping
the datalogging function. SDHC cards are not supported; use only SD
cards.
CAUTION
Always deactivate datalogging function before removing the
SDcard. Never remove the card when its LED is on.
SDcard. Never remove the card when its LED is on.
16