Avaya S8100 Manual De Usuario
J Install and cable a CMC1 cabinet
Install an S8100 with a CMC1 system cabinet
350
S8100 Installation and Upgrades
November 2003
Floor mount the CMC1 cabinet
The dimensions of each cabinet (with floor pedestal) are 28.5 inches (72.4 cm) high × 24.5 inches
(62.2 cm) wide × 12 inches (30.5 cm) deep. Maintain a service clearance of 12 inches (30.5 cm) on the
left, right, and front of the cabinet. If your configuration requires 2 cabinets, be sure each maintains the
service clearance of 12 inches (30.5 cm) on the left, right, and front sides.
(62.2 cm) wide × 12 inches (30.5 cm) deep. Maintain a service clearance of 12 inches (30.5 cm) on the
left, right, and front of the cabinet. If your configuration requires 2 cabinets, be sure each maintains the
service clearance of 12 inches (30.5 cm) on the left, right, and front sides.
To floor mount the cabinet:
1
Floor mount the cabinet as shown in
Figure 56: Typical floor-mounted installation
2
Proceed to
Wall mount the CMC1 cabinets
!
DANGER
:
A fully loaded system with a single CMC1 cabinet weighs 58 lbs (26.3 kg). Use lifting
precautions. The CMC1 unit weighs 29 lbs (13.1 kg) with the doors, power unit, and
circuit packs removed.
precautions. The CMC1 unit weighs 29 lbs (13.1 kg) with the doors, power unit, and
circuit packs removed.
Figure notes
1
Left panel (floor-mounting pedestal)
2
#12 × 1-inch shoulder screws
3
12 inches (30.5 cm) minimum from nearest
object (required to service the circuit packs)
object (required to service the circuit packs)
indmflor KLC 083002
1
2
3