Ciprico 4105 Series Manual De Usuario
Maintenance
MediaVault 4105 User Manual
8-2
MV 4105_Ciprico Inc.
Disk Drive Module Replacement
Removing, replacing, and rebuilding a disk drive module consists of four
inter-related procedures. Perform these four procedures in sequence:
inter-related procedures. Perform these four procedures in sequence:
1.
“Power-Off the Host Computer and MediaVault Unit” (see below)
2.
“Remove the Front Panel” (see
3.
“Remove the Disk Drive Module” (see
4.
“Install and Rebuild a Disk Drive Module”. Rebuild the disk drive
module, depending on whether the disk drive failed in RAID 0 mode
(see
module, depending on whether the disk drive failed in RAID 0 mode
(see
Power-Off the Host Computer and MediaVault Unit
Before removing and replacing any components from the MV 4105,
perform the following:
perform the following:
1.
Power-off the host computer (PC or Macintosh).
2.
Power-off the MV 4105.