Brocade Communications Systems 12.4.00a Manual De Usuario

Traffic segmentation

1

The contents of the display are defined in the following table.

You can use the show vlan-bridge command to show all of the bridged VLANs as follows.

ServerIron# show vlan-bridge

IN-VLAN

Bridge VLAN

222

333

333

222

Syntax: show vlan-bridge

The contents of the display are defined in the following table.

TABLE 2

Display from show vlan command

This field...

Displays...

PORT-VLAN

The VLAN ID of the PORT VLAN configured. 

Bridge VLAN

The VLAN ID of the associated bridge VLAN.

Name

The name of the VLAN as configured. If no name is configured, “{None]” is 
displayed

Priority level

The QoS priority as configured. If no priority value is configured the value 
displayed will be “0”.

Spanning tree

Displays the value of spanning tree protocol on this VLAN. Values can be “On” 
or “Off”.

Untagged Ports

Displays the untagged port members of the VLAN.

Tagged Ports

Displays the tagged port members of the VLAN.

Uplink Ports

Displays the uplink port members of the VLAN.

DualMode Ports

Displays the port members of the VLAN that are in dual mode.

TABLE 3

Display from show vlan-bridge command

This field...

Displays...

IN-VLAN

The VLAN ID of the PORT VLAN configured.

Bridge VLAN

The VLAN ID of the associated bridge VLAN.