Brocade Communications Systems 12.4.00 Manual De Usuario
182
ServerIron ADX Global Server Load Balancing Guide
53-1002437-01
Displaying GSLB information
1
To display dynamic server information, enter the commands shown in the following examples. The
portions of the output that are shown in bold type are those of interest.
portions of the output that are shown in bold type are those of interest.
Displaying dynamic real server information
To display the real servers that the ServerIron ADX dynamically has created for the site addresses
from DNS replies, enter the following information.
from DNS replies, enter the following information.
This example shows real servers dynamically created for two sites that were listed in DNS replies.
Syntax: show server dynamic real
Displaying virtual server information
You can display internal virtual servers. The purpose of these servers is to allow the ServerIron ADX
to bind to the dynamically created real servers. The ServerIron ADX uses private IP addresses
starting with 10.10.10.10 for the names and IP addresses of the virtual servers. The ServerIron
ADX does not respond to pings or ARP requests to the addresses it uses for the internal virtual
servers. Thus, if your network also uses these addresses, the virtual servers do not create address
conflicts.
to bind to the dynamically created real servers. The ServerIron ADX uses private IP addresses
starting with 10.10.10.10 for the names and IP addresses of the virtual servers. The ServerIron
ADX does not respond to pings or ARP requests to the addresses it uses for the internal virtual
servers. Thus, if your network also uses these addresses, the virtual servers do not create address
conflicts.
NOTE
Since the dynamic virtual servers use addresses in the 10.10.10.x/23 subnet for the internal
database, a GSLB ServerIron ADX cannot support user-configured real and virtual servers in this
address range.
Since the dynamic virtual servers use addresses in the 10.10.10.x/23 subnet for the internal
database, a GSLB ServerIron ADX cannot support user-configured real and virtual servers in this
address range.
ServerIronADX(config)# show server dynamic virtual
ServerIronADX(config)# show server dynamic real
Real Servers Info
Name : 209.157.22.229
IP:209.157.22.229 Range:1 State:Active Wt:1 Max-conn:1000000
Port State Ms CurConn TotConn Rx-pkts Tx-pkts Rx-octet Tx-octet Reas
---- ----- -- ------- ------- ------- ------- -------- -------- ----
http active 0 0 0 0 0 0 0 0
default unbnd 0 0 0 0 0 0 0 0
Server Total 0 0 0 0 0 0 0
Name : 209.157.22.230
IP:209.157.22.130 Range:1 State:Active Wt:1 Max-conn:1000000
Port State Ms CurConn TotConn Rx-pkts Tx-pkts Rx-octet Tx-octet Reas
---- ----- -- ------- ------- ------- ------- -------- -------- ----
http failed 0 0 0 0 0 0 0 0
default unbnd 0 0 0 0 0 0 0 0
Server Total 0 0 0 0 0 0 0