Cobra Electronics PR135 Manual De Usuario

1. 

Press and hold the 

Power button until you

hear a series of audible tones indicating the
radio is On.

Your microTALK

®

radio is now in 

Standby Mode,

ready to receive transmissions. The radio is
always in 

Standby Mode except when the 

or Call buttons ar

e pressed.

When batter

y power is low, the 

icon will blink. Y

our batteries should be replaced

or recharged, if using rechargeable batteries.

Y

our microTALK

®

radio has a unique circuit

designed to extend battery life. If there are no
transmissions within ten (10) seconds, the radio
will automatically switch to 

.

This will not affect the radio’s ability to receive
incoming transmissions.

1. Pr

ess and hold the 

button.

2. With the microphone about two (2) inches (5 cm)

from your mouth, speak in a normal voice.

3. Release the 

button when you ar

e 

finished talking and listen for a response.

You cannot receive incoming calls while 
pressing the Talk button.

Both radios must be tuned to 
the same channel to communicate.

Pr

ess and release the 

Mode/Lock button to 

scroll through the Mode functions. In Mode
Function, you can set Privacy Codes and 
turn “Roger Beep” On or Off.