Cobra Electronics MicroTalk 2-Way Radio Manual De Usuario
Turning On Your microTalk
Press and hold
the power button for 2
seconds. An audible “tone” will indicate the unit is
on and then the LCD will go through a 3 second
self-test and then go to Operational Mode.
on and then the LCD will go through a 3 second
self-test and then go to Operational Mode.
Operation
5
Note
Whenever the unit is on you
can receive communica-
tions.
Whenever the unit is on you
can receive communica-
tions.
Turning
On Your
microTALK
On Your
microTALK
Operation
4
Note
The Auto Battery S ave Circuit
does not effect the unit ’s
ability to receive incoming
transmissions.
Auto Battery Power Saver
Your microTALK has a unique circuit designed to
extend battery life. If there are no transmissions
within 10 seconds, the unit will automatically
switch to battery Save
extend battery life. If there are no transmissions
within 10 seconds, the unit will automatically
switch to battery Save
Mode.
The
icon will flash.
Auto Battery
Power Saver
Power Saver
Illuminating the Display
Illuminating
the Display
the Display
Press and release
LIGHT/MAX RANGE
button to illuminate display for ten seconds.
Note
Units must be on same
channel and subchannels to
communicate.
Note
Channels 8-12 generally are
less used and give better results
for communications in most
areas.
Note
Push and hold the channel
up/down button for fast chan-
nel advance.
Select Main
Channel
Channel
Select Main Channel (1-14)
Turn on the microTALK. An audible “tone” will
indicate the unit is on and then the LCD will
go through a 3 second self-test and then go to
Operational Mode.
indicate the unit is on and then the LCD will
go through a 3 second self-test and then go to
Operational Mode.
Select channel by moving the Channel Button
up or down.
up or down.
FRS305 MANUAL.qx 12/5/00 9:56 AM Page 4