Cisco Systems ata 186 Manual De Usuario
5-24
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Chapter 5 Parameters and Defaults
Operational Parameters
Range
-9 to 2 dB
Default
-4
Voice Configuration Menu Access Code
371
Related Parameter
ConnectMode
Description
This parameter is a 32-bit bitmap to control the connection mode of the selected call signaling protocol.
provides bit definitions for this parameter.
Value Type
Bitmap
Default
0x90000400
Voice Configuration Menu Access Code
311
Table 5-2
ConnectMode Parameter Bit Definitions
Bit Number
Definition
0-1
Reserved.
2
0—Use the dynamic payload type 126/127 as the RTP payload type (fax pass-through mode) for G.711
µ-law/G.711 A-law.
µ-law/G.711 A-law.
1—Use the standard payload type 0/8 as the RTP payload type (fax pass-through mode) for G.711
µ-law/G.711 A-law.
µ-law/G.711 A-law.
Default: 0
3-6
Reserved.
7
0/1—Disable/enable fax pass-through redundancy.
Default: 0
8-12
Specifiy the fax pass-through NSE payload type with these bits. The value is the offset to the NSE payload
base number of 96. The valid range is 0-23; the default is 4.
base number of 96. The valid range is 0-23; the default is 4.
For example, if the offset is 4, the NSE payload type is 100.