Cisco Systems 188 Manual De Usuario

Descargar
Página de 218
 
C-4
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP)
OL-3410-01
Appendix C      Cisco ATA Specifications
Software Specifications
Fax
G.711 fax pass-through and G.711 fax mode.
Enhanced fax pass-through is supported on the Cisco ATA. 
Success of fax transmissions up to 14.4 kbps depends on 
network conditions, and fax modem/fax machine tolerance to 
those conditions. The network must have reasonably low 
network jitter, network delay, and packet-loss rate.
Line-echo cancellation
Echo canceller for each port
8 ms echo length
Nonlinear echo suppression (ERL > 28 dB for frequency 
= 300 to 2400 Hz)
Convergence time = 250 ms
ERLE = 10 to 20 dB
Double-talk detection
Out-of-band DTMF
H.245 out-of-band DTMF for H.323
RFC 2833 AVT tones for SIP, MGCP, SCCP
Configuration
DHCP (RFC 2131)
Web configuration via built-in Web server
Touch-tone telephone keypad configuration with voice 
prompt
Basic boot configuration (RFC 1350 TFTP Profiling)
Dial plan configuration
Cisco Discovery Protocol
Quality of Service
Class-of-service (CoS) bit-tagging (802.1P)
Type-of-service (ToS) bit-tagging
Security
H.235 for H.323
RC4 encryption for TFTP configuration files
Voice coder-decoders (codecs)
Note
In simultaneous dual-port operation, the second port is 
limited to G.711 when using G.729.
G.723.1
G.729, G.729A, G.729AB
G.723.1
G.711A-law
G.711µ-law
Table C-6
Software Specifications (All Protocols) (continued)
Description
Specification