Cisco Systems Linksys PAP2 Manual De Usuario

http://<PAP2-ip-addr>/admin/upgrade?[protocol://][server-name[:port]][/firmware-pathname

]

If no protocol is specified, TFTP is assumed. Note: Only TFTP is supported in the current release.

If no server-name is specified, the host that requests the URL is used as server-name.

If no port specified, default port of the protocol is used. (69 for TFTP, 80 for http, 443 for HTTPS)

The “firmware-pathname” is typically the file name of the PHONE ADAPTER binary located in the root
directory of the TFTP server. If no firmware-pathname is specified, “/Phone Adapter.bin” is assumed.

For example:

http://192.168.2.217/upgrade?tftp://192.168.2.251/PAP2.bin

3.4.2. Resync

URL

Through Resync URL you can force the PHONE ADAPTER to do a resync to a profile specified in the
URL.

Note: The PHONE ADAPTER will resync only when it is idle.

The syntax of Resync URL is:

http://<Phone Adapter-ip-addr>/resync?[[protocol://][server-name[:port]]/profile-pathname]

If no parameter follows “/resync?”, the profile rule setting in provisioning is used. See 4.2 for detailed
information about profile rule in provisioning

If no protocol is specified, TFTP protocol is assumed. Note: Only TFTP is supported in the current
release.

If no server-name is specified, the host that requests the URL is used as server-name.

If no port specified, default port of the protocol is used – 69 for TFTP, 80 for http, 443 for HTTPS.

The profile-path is the path to the new profile to resync with.

For example:

http://192.168.2.217/upgrade?tftp://192.168.2.251/PAP2.scf

3.4.3. Reboot

URL

Through the Reboot URL, you can reboot the PHONE ADAPTER.

Note: Upon request, the PHONE ADAPTER will reboot only when it is idle.

The Reboot URL is:

http://<Phone Adapter-ip-addr>/admin/reboot

3.4.4.

Factory Reset URL

Through the Reset URL, you can perform a factory reset of the PHONE ADAPTER.

Note: Upon request, the PHONE ADAPTER will reset and then reboot only when it is idle.

The Reset URL is:

http://<Phone Adapter-ip-addr>/admin/reset