Hitachi 32LD6600A Manual De Usuario

- 21 -

and stored the TV signals. Store the test sig-

nal under programme number 0.

Replace the aerial cable in the aerial

socket of your video recorder once you have

stored the test signal.

Camera And Camcorder

To Connect To AV Input

Connect your camera or camcorder to AV

(EXT-4) input at the right side of the TV.
Connect your equipment to the TV via VIDEO

(yellow), AUDIO R (red) and AUDIO L (white)

inputs. You must connect the jacks to the in-

put using the same colour.

To Connect To S-VHS Input

Connect your camera or camcorder S-VHS

input at the right side of the TV.
Connect your equipment to the TV via S-VHS

input and audio inputs of AV inputs by using

S-VHS cables.

Connect The Decoder To The

Video Recorder

Some video recorders have a special Scart

socket for decoder.
Connect a Scart cable to the Scart socket of

your decoder and to the special Scart socket

of your video recorder. Refer to the booklet

of your video recorder.

To connect your video recorder to the TV, re-

fer to the TV and Video Recorder section.

If you want to connect more equipment to

your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket at the

right side of the TV, to connect headphones.

Connecting External Speakers

Connect the "Scart Adaptor" supplied with

your TV (seen below) to Scart 2 socket to

use it as an output socket. This adaptor in-

cludes a switch to select between input and

output. Select "Output" and use Audio sock-

ets to connect an amplifier and external

speakers to your TV.

Note: If you use the S-VHS socket of the

Scart Adaptor, you will only get a black and

white image.

01-ENG-32705W-CLE967 UK-HITACHI 32 INCH TFT-TRIDENT-(SAM)-50076727.p65

20.10.2005, 09:56