Motorola T5720 Manual De Usuario

Interference Eliminator Codes help minimize interference by providing you with a 
choice of code combinations.

To set the code for a channel:

1. Press 

\

  until the code starts to flash.

2.  Press 

]

 or 

[

 to select the code.

3.  Press 

M

 to save the code setting.

You can set a different code for each channel using this procedure.

Note: You must set the Interference Eliminator Code to 

0

 on an FRS radio that 

uses Interference Eliminator Codes to communicate with other FRS radios that 
do not have Interference Eliminator Codes.

To prevent accidental transmissions and save battery life, the radio emits a 
continuous warning tone and stops transmitting if you press 

M

 for 60 continuous 

seconds.

1042b60a.book  Page 21  Friday, January 17, 2003  2:43 PM